Premium 3D Printer
Filaments – PLA
Benefits & Features
1.75mm and 3.0mm diameters
Vivid colors
Low Diameter variance
High Purity USA made PLA pellets
Colors as unique as Skin, Gold, Silver, Glow In The Dark, etc.
PLA
Typical Material & Application Properties (1,2,3)
Film Properties
Density
Tensile Strength
Tensile Modulus
Elongation at Break
Elmendorf Tear
Spencer Impact
Transmission Rates
Optical Characteristics
Thermal Characteristics
Suggested Printing
Temperature
-
MD
TD
MD
TD
MD
TD
MD
TD
-
Oxygen
Carbon Dioxide
Water Vapor
Haze
Gloss, 20°
Melting Point
190°C - 200°C
Ingeo 4032D
1.24 g/cc
15 kpsi
21 kpsi
500 kpsi
550 kpsi
180%
100%
17 g/mil
14 g/mil
2.5 joules
675 cc-mil/m²-24hr-atm
2,850 cc-mil/m²-24hr-atm
375 g-mil/m²-24hr-atm
2.1%
90
155-170°C
-
ASTM Method
D1505
D882
D882
D882
D882
D882
D882
D1922
D1922
-
D1434
Internal
F1249
D1003
D1003
D3418
-
Rev. Date: 01 May 2014 / Ver. 1.00
Page
1
of 2
Premium 3D Printer
Filaments – PLA
Quality Control
Diameter Tolerance
Round Tolerance
1.75mm: 1.7+/-0.1mm
+/-0.05mm
PLA
3.0mm: 2.95+/-0.1mm
Technical Support
Contact us regarding any questions, improvement suggestions, or problems with this product. Application
notes, instructions, and FAQs are located at
www.mgchemicals.com.
Email:
support@mgchemicals.com
Phone:1-800-340-0772 Ext. 1030 (Canada, Mexico & USA)
1-905-331-1396 Ext. 1030 (International)
Fax: 1-905-331-2862 or 1-800-340-0773
Mailing Address:
Manufacturing & Support
1210 Corporate Drive
Burlington, Ontario, Canada
L5L 5R6
Head Office
9347-193rd Street
Surrey. British Columbia, Canada
V4N 4E7
Shelf Life and Storage
For best results use within six months after opening package.
Store in air tight bag with desiccant when not in use.
Store in a cool, dry non humid area.
Warranty
M.G. Chemicals Ltd.
warranties this product for 90 days from the date of purchase by the end user.
M.G.
Chemicals Ltd.
makes no claims as to shelf life of this product for the warranty. The liability of
M.G.
Chemicals Ltd.
whether based on its warranty, contracts, or otherwise shall in no case include incidental or
consequential damage.
Disclaimer
This information is believed to be accurate. It is intended for professional end users having the skills to
evaluate and use the data properly.
M.G. Chemicals Ltd.
does not guarantee the accuracy of the data and
assumes no liability in connection with damages incurred while using it.
Rev. Date: 01 May 2014 / Ver. 1.00
Page
2
of 2
PCB设计
